Search results
-
A
2010 lr4 sirius module location
I think you guys are right. I was paying $200 plus for my service and felt it was too much. So I called in the other day to renew my existing account (no break in service) and moved down to the "Mostly Music" tier. Right after my payment went through my audio display was locked on to the last... -
A
2010 lr4 sirius module location
Got the same problem. just renewed my subscription with no lapse and now I only get channel 2. So, where is this module? I pulled the fuses to reset, but no luck. Had Sirius send several refresh signals to no avail. Thanks -
A
What the heck is that?
That makes this the best return on my investment. Now, where to sell it... -
A
Changed Side Vents to Black
Thanks guys! My motto: The worst I can do is break it. I modified your directions and slid a long standard screwdriver in the slot where the hood hinges are located. Gently pushed on the tabs and it popped right out. I do have a new question though. When I looked down in the negative space... -
A
What the heck is that?
What is the plastic bag stuffed in the fenderwell? I just removed the passenger side-vent and when I looked down inside the opening, sticking out of the passenger compartment is a plastic wrapped object. It appears to be filled with foam and is loosely installed as I can wiggle it around and... -
A
Changed Side Vents to Black
Late post: How do you remove the side vents so I can paint mine? -
A
Comp PD1880 hubcaps?
Umbertob, I am getting my wheels powder coated this week and need to know how to remove the TPMS so I can put them back in when I get them back. How are they installed or should I just buy new sensors (might damage them upon removal?)? the current sensors work fine. Thanks, ANGLR4 -
A
LED Off Road Light Bars
Sorry about the delayed reply. In answer to your question, about 450 lumens. Some will say the rigid is a better product, but not for the difference in cost. Both are have extruded aluminum frames and the wiring harnesses were comparable. I plugged them both in and saw no difference. to this... -
A
black oem wheels and ltz zeon
why did you choose to leave the lug nuts chromed instead of powder coating? -
A
black oem wheels and ltz zeon
how did you deal with the pressure sensors during the powder coating process? -
A
Driving Lamps - LR4/D4
Thanks for the feed back. I had a blast. I relayed them into the high beams and when they come on the truly flood the area with light. They say to never drive faster than your headlights? I think 175 would be pushing it. I did have to relocate the horns to the right fender between the headlight... -
A
LED Off Road Light Bars
Here you go. Mounted 30" in front grill and no shaking, recessed to keep it looking like its part of the vehicle, and only $275 thru Amazon. It's a tuff stuff lightbar. I compared it with the rigid (I bought both) and quality and performance were the same. My light meter showed a negligible... -
A
Driving Lamps - LR4/D4
I went with a 30" spot/flood combo bar in the front grill. Didn't want to have a light on my bumper or on the roof. Roof light seam to bounce light back during snow/rain/fog. I like the effect from the front grill. Some have said the Rigid is the way to go and I tried both the rigid and the... -
A
Stereo head unit shuts down
2010 LR4 LUX Has anyone had the following show up on the stereo screen: "Shutting Down - Temperature Error" Today I drove 93 miles down to Helena MT and about 1 hr and 20 mins in I got this message. After about 10 seconds the head unit powered down. I put my hand on the screen and it felt... -
A
Ultimate 30" LED Light Bar Install
My beautiful wife bought me a 30" LED light bar for my birthday this week. Although its not a Rigid Light Bar, it more than makes up for it in quality and ability to flood the road and surrounding land with enough light to eliminate the dark side of the moon. Tuff Stuff 30" LED Light Bar ($279... -
A
Reset the Warning Light
Just replaced rear brake pads and had rotors turned to 18.25 mm. I have not replaced the sensor as a new one is on order. Front pads still have meat on them. The wire for the rear sensor has a integrity issue with the insulating jacket. How do I get the warning lights to go out? -
A
"Mic"ing my brake rotor
Very nice. I didn't think there was enough room. I think the one downfall is if I have a groove and it. Doesn't line up with the window. I did realize,though, I can mic the rotor while the wheel is still on. I just lay the jaws of the mic down in the curvature of the wheel and then slide the mic... -
A
What is the material?
Has anyone ever drilled into the vertical supports behind the front grill? I am getting ready to mount a 30"LED lightbar and am mounting my "L" brackets just inside the headlight assemblies. What ever the material is, at the bottom of the opening are the two slots the grill fits into and there... -
A
"Mic"ing my brake rotor
Measuring Brake Rotors Don't know how you guys do it, but I couldn't figure out how to take my micrometer to measure my rear rotors without pulling the wheels and calipers, as there is now window thru the backplate. So, I made my own window. Here's what I did (please tell me if I reinvented the... -
A
Changing a tire
Help: owners manual says to raise my 2010 LR4 to off road height (as high as it will go) before I jack up the car. But the local land rover dealer says no need. I'm gonna use a floor jack and place it under the identified lifting point on the passenger side rear. Which do I do and what happens... -
A
Brake Pads and Rotors
OK, I have read through all the threads and I see all the posts about brakes but can't find anything on aftermarket supplies. So, do I really need to go OEM on my brake pads and parts? I am just doing the rear and see no problem with AutoZone or O'Reilly or any of the other suppliers. It's not... -
A
LED Off Road Light Bars
Like an idiot, I will do it myself. Plans are to make the front of the light bar flush with the front of the grill, or atleast make the top of the light bar flush with the top of the opening in the grill. I don't want it to protrude forward of the grill. -
A
LED Off Road Light Bars
I'm looking at a 30" light bar with the intentions of mounting it in the front grill. My initial plans are to mount two "L" brackets (one on each inside of the radiator support frame and facing each other) and mount the light bar across them. Doing this will require removal of a portion of the...
