Rebuilt my Hitachi compressor and mounted it back up today. The desiccant was white had not turned into a rock or broken apart into dust yet. Pretty sure this is the first time its been serviced at 107K. There were no suspension issues prior but I wanted to change the desiccant and it snowballed to the rebuild. It raises the truck much faster with a lot less noise when operating.
Now, for the but... the compressor will run about every four to five minutes even without a change to the suspension height. I did pull the FoMoCo relay and changed it for one with the rebuild kit from X8R. Checked for leaks and found nothing with soap and water.
Is there anything to check with the iid tool or should I try changing back to the old relay and see if that will fix it up? I'm pretty much stumped not having found any leaks. Ideas?
JD
Now, for the but... the compressor will run about every four to five minutes even without a change to the suspension height. I did pull the FoMoCo relay and changed it for one with the rebuild kit from X8R. Checked for leaks and found nothing with soap and water.
Is there anything to check with the iid tool or should I try changing back to the old relay and see if that will fix it up? I'm pretty much stumped not having found any leaks. Ideas?
JD