I have a 05 lr3,
I have a leak i believe in the front. Im pretty sure it is either the front air block or a front air strut.
It is not that bad of a leak and usually just takes a long time to fill up the front. Also the compressor stays on for a long time and that causes the fuse to blow.
I was planning on replacing the block soon, I also had a brake light come on a week ago so i decided to handle the breaks first.
I did not know there was a cretin procedure for jacking this truck up, with that being said i proceeded to jack the passenger side up by the frame rail. As i did this the rear purged some air and the back end lowered. I put it on a jack stand the proceeded to jack the other side up by the frame rail. And the same thing happened for the other side.
I thought nothing of it and proceeded to inspect the breaks only to find the sensor wire got loose and damaged and was tripping the sensor, the breaks looked 85%.
I loaded up the truck for a road trip and immediately noticed the 60a fuse to the air compressor was blown. after changing it a warning came on that i have never seen something along the lines of "compressor air hot vehicle will rise when cooled" but it never raised.
Then the dash sensor indicating a suspension problem changed from orange to red and said max mph30.
Please Help I rebuilt the compressor 4 month ago and i am pretty certain that is not the issue but i could be wrong, is the some other way of resetting the air system other than pulling the battery leads for 30min?
Any help would be greatly appreciated
I have a leak i believe in the front. Im pretty sure it is either the front air block or a front air strut.
It is not that bad of a leak and usually just takes a long time to fill up the front. Also the compressor stays on for a long time and that causes the fuse to blow.
I was planning on replacing the block soon, I also had a brake light come on a week ago so i decided to handle the breaks first.
I did not know there was a cretin procedure for jacking this truck up, with that being said i proceeded to jack the passenger side up by the frame rail. As i did this the rear purged some air and the back end lowered. I put it on a jack stand the proceeded to jack the other side up by the frame rail. And the same thing happened for the other side.
I thought nothing of it and proceeded to inspect the breaks only to find the sensor wire got loose and damaged and was tripping the sensor, the breaks looked 85%.
I loaded up the truck for a road trip and immediately noticed the 60a fuse to the air compressor was blown. after changing it a warning came on that i have never seen something along the lines of "compressor air hot vehicle will rise when cooled" but it never raised.
Then the dash sensor indicating a suspension problem changed from orange to red and said max mph30.
Please Help I rebuilt the compressor 4 month ago and i am pretty certain that is not the issue but i could be wrong, is the some other way of resetting the air system other than pulling the battery leads for 30min?
Any help would be greatly appreciated