Search results
-
Engine revs high upon start up
Normal might be 2k rpm or less. Mine surges up for the same period of time too high for normal. -
Engine revs high upon start up
Vacuum Leak, probably, if it goes that high. I have the same thing at the moment, replaced a damaged hose, and now am looking at the valve cover to remedy the situation. Mine goes up to 2k or so, won't let me shift out of park until it drops, then it drops down to normal idle after maybe 15... -
-
2014 lr4 sonnax zip kit transmission service 75k
Well it was time to do my pan and filter and I thought since I have had some harsher shifting and downshift clunk happening for some time (diff fluid solved it temporarily but it returned) I might as well fix what I can while it is open. I bought the sonnax zip kit for the zf8hp70. And the pan... -
Top Hatch Won't Open - What to Replace?
Yeah that’s dead. Mine fires hard but the latch was sticking. -
Top Hatch Won't Open - What to Replace?
If you can get the hatch open try greasing the latch receiver. Worked a charm for me. As long as the actuator is firing. You may have to check that your wire didn’t pop free of the actuator. Was not a problem in my 14 but I know they changed the design for 14. -
2014 LR4 tailgate would not open
Yeah, i know there are some LR3/4 threads on this, but i solved mine a little differently. My actuator was firing, but the tailgate (glass top) would not open. I went through the "open up the carpet panel while inside the truck" solution, then popped the gate down and pulled the actuator. It... -
255/55R19 Pictures! Duratrac vs. Geolandar A/T G015 vs. Terrain Contact A/T
I got 26k miles or so out of the oem contis. Crap tire. Had duratracs for over 50k (which I consider great given the weight of this thing). Pulled them off yesterday and put on the continental AT tires. So far so good. Road noise is WAY less than the duratracs. That may be due to wear as I... -
Clunk when accelerating from roll - solved
quick post to give my experience on the clunk while accelerating from a slow roll. Like when releasing brakes on a slight downhill and then hitting the gas. Also a slight chattering when accelerating through a corner when the inside wheel is unweighted. I thought this aspect may be another LCA... -
-
LR4 on 33's
I seriously hope you document the whole process. If it works I think everyone will need to see the work. -
SELLING Grey Compomotive Wheels & 265/65 BFG KO2 Tires!!!
Where are you in SoCal? -
Is a d5 a great deal right now?
I don’t read the d5 forum. For anyone who does, what’s the consensus over there? Are they loving their trucks? Are we just a different breed ? -
Is a d5 a great deal right now?
It’s almost like they hired someone who did not love the Lr4 to design the next one. -
Is a d5 a great deal right now?
For those who didn’t catch it ASPW talks about what LR should do about the defender and I think it’s somewhat in answer to the lack of demand for the D5. -
Is a d5 a great deal right now?
I’ll look up the page later when I get home. On paper the diesel D5 looks amazing. But I guess it shows that the “soul” of the vehicle matters -
Is a d5 a great deal right now?
i am seeing local 2017 diesel HSEs for around 43k with a CPO and only 5k miles. This sounds like a steal. Why is the price so low? -
Phone Mount For LR4?
I use a ram mount suction to the windshield and their x grip. As stable as it gets. -
-
WTB: VPLAT0137 Trailer Wiring Harness for ‘14-‘16 LR4
I used the AB one on my 2014 -
Snow Chains
FWIW, i was in mammoth lakes this weekend during a blizzard and didn't even get my chains out. the duratracs have 40k miles on them now. and they are still fine. -
Light Bar Wiring Routing
That’s where mine is. Just be careful with the a pillar clips as they can break and then it will not go on right. And I don’t love the wiring situation coming out of the front rack rail cover. It has a hard time totally snapping down with the extra wire and connector in there. -
DIY Oil Change for LR4
i am using amsoil. I think i will run an analysis just for kicks with their kit on the next change. -
Snow Chains
https://www.roverparts.com/parts/8940 no clearance issues. just make sure you tighten the tensioner, and then retighten after a 1/4 mile or so. they are REAL chains. if it's not deep it will be a bumpy ride. i use them on the fronts for the stopping power. there is endless discussion about... -
Snow Chains
I use RUD grip chains if needed. That is rare. I have 19" wheels and duratracs and they have performed pretty admirably in the snow. But i go to mammoth almost every weekend in the winter. I have only used the chains once up there, in a real dump, after a warm spell, so the roads were iced...
