2000land rover discovery series 2, heater fan/cooling fan(front and rear unit) will not energize via switch.so far i have done the following.......pulled both fans and tested,changed alll relays, swapped out diode( in front unit fan box)
traced out grounds, all good, swapped out heater cooling control box for a known good unit, all to no aval. control box powers up, fan control bars up from pos 1 thru max, no fan. only thing i have noticed is at the fuse box when i power up the fan switch i loose power from the hot side of the F7 fuse,what am i missing?
driveing me nuts here.
traced out grounds, all good, swapped out heater cooling control box for a known good unit, all to no aval. control box powers up, fan control bars up from pos 1 thru max, no fan. only thing i have noticed is at the fuse box when i power up the fan switch i loose power from the hot side of the F7 fuse,what am i missing?
