My 06 LR3 V8 cranks but won't start intermittently, starts after sitting overnight, seems to be after driving in the rain or washing it, replaced crank sensor because I saw in another thread this may be the issue, happened again today.
06 lr3 cranks wont start when wet
- Thread starter egeiser
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
waspjr123
Full Access Member
- Joined
- Dec 25, 2013
- Posts
- 73
- Reaction score
- 0
Hhm weird you could try accessing you engibe wire harness and mist it a bit in an area the try and start and so on. But I would have a good look for at you ignition wires or your crank sensor wires or connector if water find a lil brake and shorts the ignition fire sense signal it won't start. Do you have a obd scanner ?
wiring splice in right hand door sill?
Here is a link worth at least looking at. The post of merit is the roverguy7 post where he talks about a splice I never knew about that can give problems.
In your case, it probably is not the solution, however it may be worth looking at regardless.
http:// landroverforums. com/ forum/lr3-28/2005-lr3-brake-switch-issue-fault-code-p0504-need-help-68522/page2/issue-fault-code-p0504-need-help-68522/page2/
To get the link above to work, take out the three spaces I inserted and then paste into a browser page. This forum likes to block solutions.
Here is a link worth at least looking at. The post of merit is the roverguy7 post where he talks about a splice I never knew about that can give problems.
In your case, it probably is not the solution, however it may be worth looking at regardless.
http:// landroverforums. com/ forum/lr3-28/2005-lr3-brake-switch-issue-fault-code-p0504-need-help-68522/page2/issue-fault-code-p0504-need-help-68522/page2/
To get the link above to work, take out the three spaces I inserted and then paste into a browser page. This forum likes to block solutions.
