Search results

  1. morrisdl

    LR4 vs Defender

    @hickersb That is the OEM axles that came with HD LR3s w/OEM lockers. The Lucky8 HD axles and CVs look to be double the diameter. I too lust for these. https://lucky8llc.com/collections/lr3-cv-shafts/products/hd-cv-axle-kit
  2. morrisdl

    LR4 vs Defender

    Only one way to solve this....get Disco3,4,5, and D2 together and run the same trails. I suggest Potts Mt VA, Uwharrie NC, or AoAA PA but Ill volunteer to run my modified LR3 anywhere on the east coast to see this match-up happen. Finding a new defender owner willing to wheel will be the...
  3. morrisdl

    LR4 ARB Rear Locker is possible!

    I had heard that there was a rear DIFF revision mid-model year and ARB was getting complaints that the locker would not work in SOME LR4s. ARB could not pin down which LR4s were and which were not compatible, so they pulled the LR4 from the list entirely. The L8 bolt-n-go option gets around...
  4. morrisdl

    2012 LR4 Slow suspension leak...?

    Huh; The LR couplers are $20ea. Finding alternates that rated for upto 200psi is not easy.
  5. morrisdl

    2012 LR4 Slow suspension leak...?

    ALSO: I have also been meaning to find a repair splice kit. If anyone has a suggestion what/where to buy, I appreciated it.
  6. morrisdl

    2012 LR4 Slow suspension leak...?

    I just replaced my front block for 2nd time....If that is the problem, then best practice is to also good to rebuild the desiccant in the air compressor. The desiccant beads tend to pulverize into a fine powder that gums up the blocks. I just did that too ;-)
  7. morrisdl

    2012 LR4 Slow suspension leak...?

    Measure each corner hub to fender height. Pull EAS brain fuse(F26E) or leave a door open to prevent self-leveling. Let sit until there is measurable differences. If one corner sinks most, one axle both sides, or entire truck equally, is three different possible issues. Report back the...
  8. morrisdl

    Humming sound after vehicle is turned off

    a 2nd pump? I dont think so.
  9. morrisdl

    Humming sound after vehicle is turned off

    Mine makes a DMTL pump sound in the passenger rear wheel well once-in-a-while. I Didnt know what its called before reading this thread - thank you.
  10. morrisdl

    LR3 trailer plug lights flicker

    OR, just accept the slight flashing tail lights. I had someone at the gas station ask me if that was a new safety feature like motorcycles have.
  11. morrisdl

    Tell an LR4 guy how to love that Defender rear door?

    Maybe the D2 swing gate can be modded like this classic: (ref: https://bringatrailer.com/listing/1987-land-rover-one-ten-22/) Bonus: you get awesome rain/shade cover. The gen3 4runner tailgate & power window is pinnacle of good tailgate design.
  12. morrisdl

    Avslash's Sleeping Platform - A Few More Pics Added

    Amazing work! I am definitely going to copy. Do you have an estimated total budget? I would love an shopping list on feet of tubing, connectors, carpet, etc if you have the order confirmations handy.
  13. morrisdl

    LR4 -> Defender anyone?

    Timing is everything - I bought my 2006 LR3 in 2008 for $24K :-D Gas was above $4.50/gal and no one was buying large SUVs. Those Bronco pics are just artist speculative renders.
  14. morrisdl

    Red Clay Rally, The Rovers are Coming

    Go for it! Admittedly I have not done RCR, but I have ridden many of the same trails. I would suggest: Sliders, Winch (Not harbor freight), 33" or 34" tires, and Lucky 2" strut spacers are best, GAP IIDTool. Poly front bushings seem fine. Too many people with rear poly have snapped...
  15. morrisdl

    $1k for Duratracks NOW vs $3k for ko2s on steel LATER

    I would not be comfortable going <20psi on my 275/65r18 duratracs I always get an alignment with new tires. The first 5,000 miles were quite. Used to rotated tires with every oil change, but the inside shoulders of the rears would cup. With rotation eventually all 4 were cupped and loud. I...
  16. morrisdl

    $1k for Duratracks NOW vs $3k for ko2s on steel LATER

    Good point. All my Duratrac sidewall cuts occurred in KY, NC, VA, PA, WV, VT, and NY. All very rocky. Maybe the perfect tire for FL and UT Jeeps and LR# are apples and oranges. My buddy with JKU hates same Duratrac E rated tires for harsh ride. Same tire rides great on LC80 and LR3.
  17. morrisdl

    $1k for Duratracks NOW vs $3k for ko2s on steel LATER

    The duratracs will end up casting you more! After 10, I give up on them. Almost every trip I lose 1 or even 2 new tires to a sidewall cut. Cant air them down <30psi with out increasing the risking too greatly. Im probably moving to BFG KM3, since most of my miles are just adventure trips at...
  18. morrisdl

    air suspension -- dumb question

    You may have to pull out the leveling fuses (F26) to prevent the other 2 or 3 corners from following the bad one(s) down to the ground. The rear valve block is right behind the very dirty Left/rear air strut: Replacement is pretty straight forward. Some people have had success rebuilding...
  19. morrisdl

    The obligatory "Show off your LR3' thread

    Wow they are 25% cheaper than anything else I have seen. I too am curious how they hold up to the weight of an LR3
  20. morrisdl

    The obligatory "Show off your LR3' thread

    Welcome to club. Thats my fav color (little bias) ....Those tires are beastly! What are they? FYI- I think you are missing a lug nut on the passenger front wheel.
  21. morrisdl

    Worth upgrade LR3 to LR4?

    PSA - I replaced my O2 sensors and my 150K mile LR3 is peppy again. I though the sluggishness was from all the armor and 33" wheels, but a bigger part was it was poor fuel ratio.
  22. morrisdl

    When A Rover Guy Has Too Many Beers with a Vector Artist...

    Love the logo and your LR4 setup! My OCD would have a problem with it being 1mm off the glass to the left ¯\_(ツ)_/¯ VERY curious how you print these at home?
  23. morrisdl

    Looking to buy an LR4 and have some questions

    This would make a great trail truck. Includes rear locker: https://www.copart.com/lot/41062459 Just add a steel bumper and winch.
  24. morrisdl

    Blown head gasket

    Agreed, but no one is buying heavy, expensive, and durable. Except old defender owners ;-)
  25. morrisdl

    Blown head gasket

    I understand the frustration, but AL and plastic is ubiquitous across the board for all manufactures. Cheap and light seem to be opposites of durable.

Latest posts

Forum statistics

Threads
36,702
Posts
222,594
Members
30,876
Latest member
Ejp1989
Top