Search results
-
-
AUX Switch Location
Installing or mounting the switch is a work in progress. I've narrowed down the location. It will be vertically mounted on the dash btw left of the steering column and right of the fog switches. Wiring harness is fed thru bulkhead and up adjacent to obII outlet then up behind the lower... -
AUX Switch Location
I have the switch-pro SP-8100. Amazing product, highly recommended -
-
-
-
-
Showoff Your LR4
I've added a few Rigid lights. Just about ready for the wiring install. My local shop fabricated a custom stainless bracket for front Q2's. -
Showoff Your LR4
I've only had it deployed on initial install. First impression was fantastic. It is the Autana Rugged version with diamond plate flooring, thicker fabric and beefier tubes. It also is the newest Sky version and comes standard with the lower annex. The cover is extremely thick and zips... -
ProSpeed slider install...
T4x4 sliders are the kit for protecting the air compressor. I may have to rethink my approach in that regard. -
-
ProSpeed slider install...
Weight is everything. Impact protection is more likely needed at the perimeter of a truck like when a tire slips off a rock or due to limited approach or departure angles. Steel is the better choice. However, for sliding or scraping for pure under body protection, I think aluminum would be a... -
ProSpeed slider install...
here is a shot of my Voyager sliders. Protection of the air compressor is suspect -
ProSpeed slider install...
how about a pic under showing the protection inward? curious about that -
Showoff Your LR4
UtahLR4 has the right stuff with his camera skills. Here is my lowly attempt to photo my ride. Voyager sliders, Johnson Rods, Compomotive 18's, Duratrac 275/65R18, BajaRack, Tepui Autana tent -
Finally eliminated (275/65R18) tire rub at frame horn
flush with fender liner, approx. 1 in. Couldn't see much use to go further. -
Showoff Your LR4
Our paths will cross soon, and I do look forward to that day. BTW, your truck is inspiring.. -
Showoff Your LR4
Unfortunately, I had to purchase and install short roof rails to accommodate the front sloping attachment of the Baja Rack. -
Finally eliminated (275/65R18) tire rub at frame horn
Had this done yesterday. Took a little more than 1 hour including wheel removal and re-attachment. -
-
Showoff Your LR4
ok, finally have my rack (Baja Rack) and sliders (Voyager) installed -
Cooper Zeon LTZ 285/50/20 with OEM 20x8.5 Wheels
At front tire, check the current clearance btw tire and upper A arm. You will be adding ~ 0.65" of tire there. Also with front tire, check clearance at full lock with frame horn at rear and front inner fender well. Rear tire should not be an issue. -
Showoff Your LR4
Introducing "Perseus" I had my local tire shop mount the G/Y Duratrac 275/65R18's to the Compomotive Wheels. Then I installed them with the Johnson Rods at my shop. I have several other mods in the works. Rack, sliders, underbody protection, lights..... -
My 2016 LR4 has a factory installed second battery
As an option, I think I might pivot and look into this from Goal Zero http://powerfulproducts.com/yeti-400-kits.aspx
