Search results
-
LR3 BMS Reset for Battery AGM Charging
I don't think there is a "reset" that I am aware of I have run AGM for just over 2 years now, after 2 dead interstates (each died before year 2) all H8 size From day 1 on the AGM, I chose to supplement with a battery charger 1-2x per month - Seems to be doing well so far- douglastic
- Post #2
- Forum: LR3
-
LR3 central locking failed?
I would also bet on dead fob battery, if the following still work for you: 1. can you manually lock or unlock using the key slot under the removable driver's door handle panel? 2. can you still start the LR3? If so, cheap DIY fix (you tubes has videos)- douglastic
- Post #5
- Forum: LR3
-
To buy or not to buy...
what part of the country? Dry = fewer problems Look for signs of water ingress- douglastic
- Post #5
- Forum: LR3
-
LR3 Rear Air Blower CFM/Volume reduced
You can try switching rear heater fan relay R10 with front heater fan relay R16, both in the engine compartment fuse box just as a no cost experiment. See if there is a change in behavior?- douglastic
- Post #5
- Forum: LR3
-
LR3 Rear Air Blower CFM/Volume reduced
oh . . also have you checked your front or rear controls? sometimes they can get bumped accidentally. looking at the front button for rear air (bottom right button below front passenger temp dial): - if the top light next to "A" is on (for auto), rear will match the front settings - if the...- douglastic
- Post #3
- Forum: LR3
-
LR3 Rear Air Blower CFM/Volume reduced
just the 1 cabin filter go and have your AC system tested My refrigerant was at 25% capacity (!) when not blowing cold in very hot weather (110º) - now its all good- douglastic
- Post #2
- Forum: LR3
-
-
2007 LR3 front differential ?
Also make sure you have the updated (larger) Front Diff Breather - LR019450 Visible between radiator and coolant expansion tank Easy, cheap, 2 minute install- douglastic
- Post #6
- Forum: LR3
-
2006 LR3 Hitch
Wiring is easy DIY - assuming you do not already have wiring in place Look beneath the removable rear bumper cover to check- douglastic
- Post #4
- Forum: LR3
-
-
2006 LR3 Cross County
Only you can vouch for the current state of your LR3 If you are current on maintenance and checked all your levels, just bring good spares - some fluids, select parts, def a spare bleeder T, basic tools, gloves, and your AAA card I am at 155k and don't hesitate to take mine 500+ miles with my...- douglastic
- Post #3
- Forum: LR3
-
-
Brand New LR3 LR4 OEM Hitch LR040248
Reminder: I am open to reasonable offers- douglastic
- Post #5
- Forum: Selling!
-
DRL's Blackout Headlight Mod
Nice work! As for the front plate - just remove it, and carry it in the back. If you get questioned - show them and say it fell off and you haven't re-installed it yet. Or mount it to the roof rack like the brits. Maybe CA is (surprisingly) more lax - I have run a front German plate, or none...- douglastic
- Post #21
- Forum: LR3
-
-
-
Mityvac...
Well, I'd say the time-sert is your way to go. After reading up a bit on it, looks like you will have to drill and tap the threads for the insert Not sure how this will be different in the end just simply cleaning up the threads for a "next size up" plug. Both will create shavings?- douglastic
- Post #19
- Forum: LR3
-
Mityvac...
yowch. have you gotten a 2nd or 3rd opinion/confirmation for the labor involved? Abran or LR Techniker (other forum?) are fair and knowledgable about procedures- douglastic
- Post #17
- Forum: LR3
-
Mityvac...
Oversize doesn't cross-thread (unless the wrong one was used) They just cut a little deeper in the existing thread Time-sert or Helicoil should work - give it a shot I know shavings aren't ideal near oil, but could you tap new threads and go up a full metric size? Absolute worst case - is a...- douglastic
- Post #15
- Forum: LR3
-
Mityvac...
Gotcha. How bad is it? I had success going with an oversized Dorman Plug in my Jetta. I think they even come in a double-oversize.- douglastic
- Post #13
- Forum: LR3
-
LR3 from stock to Overlandish?
I would suggest getting your hands on an ozone generator. It will kill everything - and also eliminate any odor - in places you can't reach with cleaning.- douglastic
- Post #19
- Forum: LR3
-
Mityvac...
Is the goal avoiding a buggered drain plug? Not being under the vehicle? Not dropping the skid plate? If you can get most oil out with a mityvac, you could just change more often so the residual mix diluted quicker. But you still have to get underneath to change the filter, so I am not sure I...- douglastic
- Post #11
- Forum: LR3
-
DRL's Blackout Headlight Mod
Can you post a wider pic, showing the entire LR3 with its new face?- douglastic
- Post #14
- Forum: LR3
-
Brand New LR3 LR4 OEM Hitch LR040248
Long story short, I searched for a long while for a used one before I gave up and bought a new one. Naturally, I immediately found a good used one. (which I then bought with hopes to re-coup most of my cost by selling the new one) So I am selling the brand new, unused, original packaging only...- douglastic
- Thread
- Replies: 5
- Forum: Selling!
-
SoCal Trails With Most Bang for the Buck
Update: Went on - Burns Canyon (2N02) with some friends - had a blast! Great trail from Pioneertown up to Baldwin Lake. Highly recommended!- douglastic
- Post #5
- Forum: West Coast
