These two issues seem unrelated to me. When you do a suspension component change like control arms or whatever it can require a calibration - symptoms are once you start rolling at some point the system gives a red suspension failure and you drop to the bump stops. You can clear codes but once...
Ok here is the follow up that I didn't do because the crank sensor didn't fix the problem. Next step was the Mass Air Flow Sensor - I pulled it out and cleaned it and that seemed to improve the frequency of the truck actually starting so I ordered a new one and that made zero difference. So...
When I went to the electronics shop the guy got the number off the connector and went on line and in 30 seconds had it ordered. Took a week and he charged me $50 to solder it in plus I think the connector was $14. The pin that had broken off literally fell out of the female socket plug once I...
My sequoia tells me the sunroof is open if I open the door without closing it. Nice feature. Also it will close the sunroof with the key off and the garage door works with the key off. I too have left the sunroof in the LR3 open many times which resulted in taking the circuit board from the...
LOL, we all have such terrible opinions about Landrover reliability, engineering, and not to mention Joseph Lucas' contribution to the legacy, yet we continue to love them. Not sure what it is but that green oval remains true in our hearts.
Here are the instructions, once inside you'll find a plastic liner you'll have to cut through or if you can maybe carefully pull it off you can save it to reuse. The fender side is the one I would worry about because it looks like you can't reach the nuts without removing the fender. Maybe...
I saw a silver one at a local towing company today and see that a silver one is missing from the Landrover Chattanooga website so either someone bought it and is having it transported or it has suffered some kind of catastrophic issue. I'll have faith that it is the former...
At this point they've been on lots for a couple of weeks, beside the powerfuluk video where the fault light comes on in the first few miles is anyone hearing any negative feedback? Other then price gouging, LOL...
I put in an aftermarket fuel pump and ever since it turns over and may start and may not. My diagnosis was the Beck Arnley pump wasn't holding pressure to the rail but I'm second guessing that because sometimes I can turn the key and I hear the fuel pump running and sometimes not. I'm going to...
You can go to LRNA's website and check the entire US inventory, there are about 350 in the US and many are well under $80 South Atlanta had one right at $60k.
Based on what I'm able to see from comparing dealers it looks like some of them are pricing their units with a premium thinking first purchasers are going to pay it. I am encouraged also that there are several options out there beside the "First Editions".
That well could be the VVT, comes and goes on my truck but it's more of a consistant ticking than the on and off that shows up at around 1:09. I'm not worrying about it since it's intermittent and I have other issues to worry about. Like I said if you have a long extension or any kind of metal...
Here's a link that may help you start the diagnosis:
https://www.obd-codes.com/p061b#:~:text=When%20a%20code%20P061B%20is,to%20a%20P061B%20being%20stored.
I agree with Houm on both counts however I noticed that whenever I get my LR3 back from Goodyear it's always set in high mode and read somewhere that if you lift it on a lift you should extend the suspension. I've just never taken the time to check that out. Attached are the manual sections on...
If you have a long socket extension like 2' or more if you place one end on the engine and put your ear against the other end it works like a stethoscope and you may be able to pinpoint where it's coming from but BE CAREFUL you don't get into any moving parts. My guess is water pump but it...
My issue was sport mode not working so I had the same corroded connector shown earlier. However, one of the pins was so corroded that it broke of into the female part of the plug. I removed the assembly and took the circuit board to a local computer/electronics repair shop and they were able...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.