Search results
-
2006 LR3 HSe wiring question
I am planning on removing the carpets for a major cleaning via steam or something like it, to remove coffee stains, coke stains, etc. and do some other maintenance/screw/body panel plug/nut/fastener that I can find to repair/replace. This will require a week time off from work. I already have a... -
2006 LR3 HSe wiring question
The Air Con drains for the condensate pan is beneath the truck directly under the small tank/catch pan. These have two drains which go thru the floor board under the truck to drain the water AC Condensate under the truck. Mine got clogged up with dirt and a missing pollen filter caused the pan... -
LR3 from stock to Overlandish?
Hey you have some experience with lift rods right? Well I am about to replace my front right ht sensor, and it looks like the spacer rod is permanently attached to the swing arm on this new sensor I have. Link to part below. Anyone replaced a height sensor lately? Here's what I have, and Rhino... -
-
LOCKDOWN To do List
Just got the same treatment from my LR 3 this past weekend. As it was my tailgate upper that landed the blow. Although it was a long trip and I did disrespect her a couple times on the way. POW, right in the eye socket. Put it on my wife the night before...LOL -
Fault Code U0167-00 (2A) Lost Comms with Vehicle Immobilizer
I believe if you could break down any other events that took place before this immediate event, list and post here as close to chronological order of events. What I mean is: If you recently applied an update to any ecu modules, etc.via IID, or any other dealings via the IID tool? Did you try a... -
A couple GAP iid tool questions....
#1. I believe so, even though I have not done this yet. #2. Yes you can calibrate the speedo, for tire/wheel options. When I got larger tires all I had to do was measure /guess OD of tire and select that size from drop down menu, then apply it, save and go. Other features like turning on 3... -
Accesory Drive belt(s) replacement
I replaced both accessory belts, the primary acc belt tensioner and the primary acc belt idler pulley today. I followed the Atlantic British video on utube, but I would suggest one additional step. As they show the coolant overflow tube that crosses atop the fan shroud, left to right facing... -
Tire whoas again
Not sure why the original tire people busted the shock. I assumed they over extended the shock without disabling the suspension autolevel. Maybe the shock just failed at the right time, not sure. When the air evacuated out of the system the rover wouldn't lift due to the height sensor being out... -
2006 LR3 HSe wiring question
I have the electrical diagrams but the file is too large to post. Send me a PM and I will try to figure out how to send them to you. I tried to ZIP the file but still too large. -
Tire whoas again
So last night took the rover for alignment, rotation and tire balance. Last time the tire company busted a shock as they didn't support the left rear control arm and over extended the shock. They paid for a new strut so all good. Well last night after a 3 hour time period (40 minutes quoted) the... -
LOCKDOWN To do List
I have refurbed my cracked 3rd brake light. It was cracked but also was really sun damaged. I did not neccessarlity like the outcome 100% so at some point I will just replace the light. As it still functions it is not a real issue but I can still see a line where the crack was. Before After, I... -
Advice for Brake Shake
I'm suffering thru the same issues. Especially when I barley press the brake pedal. Serviced fluid some time ago so that is out, less that 7K ago as I did with last service and I am due a service again. I had replace my rotors all 4 when I first got her with 95K on the clock. I did nor go with...- Ruper
- Post #7
- Forum: Range Rover
-
Inner/Outer Tie rod ends replacement
If I could have afforded the time to do so I would have went full arm also, cause now I will have to repeat alot if I do the bushings. I just knew I wouldn't have been able to pull all of the control arms off in a day, or I would really get something screwed up. And I didn't have time to get her... -
LR3 from stock to Overlandish?
Couple questions, hope this is not a pain for you. No quick answer needed, but I am looking at rock sliders and was wondering what you would recommend? What you have tried and how any different manuf, performed. Also what model and brand of HAM did you go for? I have a Cobra 40 CH CB that I am... -
-
LOCKDOWN To do List
So here's my update: Blackout headlights done. Upper/Lower Ball Joints done Tie Rods inner/outer done Clean out front sunroof drains done Clean out AC Drains (which flooded the carpets in both foot wells) done Next up Alignment Front (due to replacement above) Control Arm Bushings replacement... -
LR3 from stock to Overlandish?
Have you thought about replacing the carpet with rubber matting? Is there such a thing? Would probably run up some cash though. At least then you could see the sunroof leaks and ac drain leaks quicker. LMAO -
-
LR3 from stock to Overlandish?
After seeing the price I am liking mine a whole lot more. Maybe I'll redo mine. Just have other things I can spend that on right now. They are nice looking though. -
LR3 from stock to Overlandish?
Is that panel made to fit the ashtry panel? I made up a custom job with some HDPE and a 6 switch panel, but have not been too happy with the results. I didn't have a good anchor point plan. I'll have to have a look at these, only use 3 of the six switches anyway and did place a usb charger in it. -
Inner/Outer Tie rod ends replacement
Just did Upper and lower Ball Joints and both inner and outer tie rod ends. Parts from Rockauto, so cheap ones. Guess I'll see how it goes. The upper BJ's were a *****, especially since I had one day to do it and couldn't find a ball joint remover tool set at any parts store to borrow. Made my... -
Sunroof leaks
WEll I just went through wet soaking ponds in both floor boards, and turns out after preparing to rip all of the "fixings" off that my AC drains were clogged. 30 minutes with some weed eater line and I think I got it. Pretty easy to see them, take off the panels on either side of the drive... -
LR3 from stock to Overlandish?
You'll have a brand new rover when you finish. At least you knew how to find the hidden vent screws on the console, took me a whole weekend to figure that one out. Keep up the good work -
