I actually do like the idea of a rivian R1S, but my LR4 is basically a dedicated adventure travel vehicle and has been for the last 8+ years. I don't daily it much if ever. The big issue with Rivian is just the charging infrastructure and range. Even most gas vehicles will struggle to have...
I want to keep my 2013 LR4 HSE LUX HD (currently 99k miles) as long as I can, but because I am a car nerd I also still look at other cars. My current replace list, if I had to, is.
1. Defender 130. Not my favorite, but the 110 isn't long enough to sleep in the back like my LR4. I almost...
You can have a front or rear end sag from just bad EAS calibration also FYI. I had my rear sagging down after awhile and i replaced valve blocks and such trying to figure it out.
Turns out I just needed to do an EAS Calibration via the GAP IID tool and that fixed it.
If you have a bad...
The middle of the second row is such a perfect spot. It can even be made level with a set of front runner drawers in the back for a sleeping platform.
Here are the plans for my cabinets. https://docs.google.com/drawings/d/1_nhojvr_jYZhy-4bQFZz7cwcLMsXwjfhnkAtqkpgf5s/edit?usp=sharing
pretty sure WSS-M2C960-A1 is just the newer ford spec, supersedes the one in the manual. Mobil 1 extended performance is more than meeting the specs. People overthink this stuff way too much. Just use short intervals 5-10k based on driving distance, time, load and carry on. I doubt it...
I think if I were to replace my LR4 it might be a GX550. Hard to say. I thought about R1S for awhile, but dealing with the charging network/range would suck and all the overpriced body damage stories.
I plan to stick with my LR4 for as long as I can. 98k on her now. Nothing quite ticks all...
I used pelican and other cases for a long time, with the cargo barrier. But eventually I took the 3rd row seats out and put in front runner drawers. I don't regret it at all because I can keep gear more organized and more easily access it. I have a stove that is plumbed to propane in one...
That is the one spot that tends to rust first on these. Good to pull those panels, side steps, sliders, whatever and clean them and treat for rust.
Stay ahead of it. :D
Well the factory service manual says not to fill to the hole, it has specific amounts. I follow the manual. It isn't a lot different though, so I wouldn't argue it makes a ton of difference. I'd just rather follow what it says.
My reply above addresses codes, i don't get them.
The new pipe goes from the dual filler assembly to the factory metal fill pipe. Each end of the new adapter pipe is a different size to account for the different ends. Makes it as simple as having those two short rubber hose sections to...
The rear locker is nice, definitely reduces wheel spin compared to just using the braked traction control. But for people shopping for an LR3/LR4 I wouldn't say it is a deal breaker. A non-locker version can go pretty well anywhere a locked one can, just might be slightly more work in really...
Beauty might be subjective, but function and actual engineering aren't. You buy an ARB (or other aussie grade certified bars) if you want something that is functional, engineered rather than just welded up in some garage to look nice. ARBs are crash tested, and have impact crush cans to keep...
just saw this thread pop up. FYI.. the Long Range America 28 gallon aux fuel tank is now available in the U.S. with some new tweaks to the fuel filler hose/pipe that allows it to fit without fabrication work. Makes the install a bit easier. Me and a buddy installed it over a couple days (and...
Meyle HD arms are my choice. Still rubber bushes, but just not the weaker hydro bushes. They feel just like OE hydro bushes but are not going to fail. It bears repeating that you should avoid all poly bush options, they tend to cause cracked arms.
I seriously doubt the GX550 will ride better than the LR4, but I am still very interested in it. It won't replace my LR4, but I do kinda want to add one to the stable as just a daily.
It makes a lot more sense to own a Land Rover if you are willing to do the work yourself on it. The alternator should be a few hundred bucks and its like a 20 minute or less job on a garage floor to change it out.
this ^^ is why many of us recommend the Meyle HD lower control arms. They have rubber bushings that are soft and similar to the OE hydro bushes, but they are tougher than the hydro bushes and won't leak their fluid after a couple days on the trail. (riding trail with the bushing knock sucks...
I had full tactical 4x4 armor which was great for tough stuff and dragging her belly over rocks, but it weighs so much. I ended up getting Voyager sliders that have a bolt on air compressor and tank skid and removing the rest. I have more clearance now without the t44 stuff. The voyager...
From what I can find an OAT like ethylene glycol will have minor effect or slight change in appearance or properties. It says to test before repeated exposure. But... IANAC (i am not a chemist)
I have an older bumper, so the latches they were using were smaller. The new ones are friggen massive and I don't know why he felt the need to upgrade them. My latch arm is also different because I have the dual swing version so it has that extra plate that catches the second arm also.
I...
I got one of the newer T44 latches (had to upgrade from the original one since I bought it years ago). They use this version now. I find it pretty easy to use. I put a zip tie on it to keep it aligned perfectly with the hook (otherwise it has a little side to side movement). The way it...
From what I am seeing no modification of the dual filler neck is needed other than making sure the size of the filler tube matches the size of the OE filler tube. Everything else on the dual filler is good to go. As long as I adapt that size correctly (if needed, i haven't measured yet) then...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.