Search results
-
Replacement Timing Chain/Tensioner Longevity Question
Not necessarily. You can also check the timing chain on bank 2 or LH (looking from inside the cab) for tension through the oil cap. Push down and pull up on the chain with something like an o-ring removal tool that has a 90* tip. I would agree with @mm3846 on this. Checking and changing your... -
tire pressure monitor system with compomotive wheels on 2013 lr4
Imho, tpms monitoring is useless for those that are weekend wheeling out on the trails. Unlike jeeps and other vehicles that show the actual tire pressures, Land Rover has a set value range that alerts you if the pressure is out of range. On that note, I used my gap iid tool to disable it. -
Replacement Timing Chain/Tensioner Longevity Question
Word on the street is the updated tensioner and guides are still susceptible to failure. '14 and up are starting to notice timing chain issues too. Make sure you frequently check your oil level between oil changes too. My oil change frequency was every 3k and I would always be low on oil in... -
P0087 Fuel Pressure
Stealership trying to markup unnecessary parts and labor to make some money on unsuspecting folks. Sad, but they're a business for profit too. Anyhow, glad you didn't have to do the hpfps. They're easy to diy replace them if you ever have to replace. Use the iid tool to check live values for... -
Eco mode and starters
IMO the eco start/stop is dumber than the bms system. Another reason why I love my v8. Anyhow, yes, I think the eco start/stop will wear down your starter and battery system. If I had one, I'd constantly hit the eco off button and get irritated for remembering/forgetting to hit the button. I... -
Lr4 service manual in pdf format
That's one way to resurrect a 6 year old thread. Anyhow, here you go. https://www.mediafire.com/folder/5mhvubw2bens1/Dis4?fbclid=IwAR2LNldJZhRR7JenbLG_0W5jHr3gDctw5Uw3h4XnwBaU7ZaWO0DwokUFuOE -
The XLifter EAS Controller
FYI... for anyone that has an x-lifter and Facebook, @Jan Stanek has a FB support group. https://www.facebook.com/groups/XLifterSupport -
Front hitch options?
150A alternator. I seriously hate PWM. I constantly monitor mine. I have 2 cheap usb cig plug-ins with voltage and check my iid tool when I see my starting battery dip. I read live values for battery volts, battery charge percentage, alternator load, and alternator amperage. There's more, but... -
Gap iid tool - 2021 BF sale
Fyi! They just posted their 2021 Black Friday sale! https://lucky8llc.com/collections/black-friday-2021 -
Gap iid tool - 2021 BF sale
Awesome! Just trying to share the love! Get it while it's hot! -
Front hitch options?
I looked into this year's ago. There was a European company that made one specifically for the LR3, before the LR4 came out. Can't seem to remember who made it. There's others that just made their own replacing the front tow hook... -
Gap iid tool - 2021 BF sale
For anyone looking to get the GAP IID Tool, this is your opportunity. Instagram link - https://www.instagram.com/p/CWWCUB_pXnx/?utm_medium=copy_link -
LR4 Suspension warning and knocking
The knock is most likely your lca bushings or sway bar end links like everyone said. You'll need the codes to properly diagnose your suspension issues. Like gap iid tool. Your in luck, black friday sale. https://www.instagram.com/p/CWWCUB_pXnx/?utm_medium=copy_link If you tap on the left... -
Front Aux/Spotlight Mounting Options plus where do you mount your cabin switches
Funny that you should say that. I seriously debated about adding a mofi4500 into the truck for a mobile Hotspot and wired connections. After my drunken night, it clearly made no sense to have wired connections anymore these days. My Verizon mifi is my hotspot. I may just get a Weboost to... -
Front Aux/Spotlight Mounting Options plus where do you mount your cabin switches
I run a 4 awg wire through the rubber grommet on the firewall for my aux battery to a fuse box in the rear quarter panels for accessories inside cabin on individual switches. I have another fuse/relay box next to the aux battery to power all my external lights that are switched through the... -
Front Aux/Spotlight Mounting Options plus where do you mount your cabin switches
The fit is near perfect. Just need to trim the top just a tad. It was an Amazon special 6 gang modular. -
FYI fan relay went bad at 98k
Welp, time to add this to my list. I don't have an issue, but I also don't want to have an issue down the road. @Fuji4 Thanks for this enlightening post! -
Front Aux/Spotlight Mounting Options plus where do you mount your cabin switches
An older 30" Baja Designs OnX fits perfectly behind the grill. I mounted my 6 gang switch panel where the ash tray was. Don't worry the switch panel sits flush without movement. Just couldn't find a picture of it on my phone. -
New air struts and Lucky 8 SYA kit
Calibration is from the center of the wheel hub to the top edge of the fender flare. So it really doesn't matter what tire size you have. What matters is the travel length of the air strut. With the 2" SYA kit, you're actually reducing 2" from your calculations. For instance, if you have 2" or... -
The XLifter EAS Controller
@Jan Stanek I'm sure you're a very busy guy working out all the details on software feature upgrades and like a kid waiting for Christmas to come, will there be new features soon? :adore:;) -
Towing upgrades
Check out SafariGard. The guy made some improvements to the Rhino OX hitch and made a batch of them and very reasonably priced. I think it was going for $450. https://safarigardllc.com/ https://www.instagram.com/p/CUzPKeLrmAf/?utm_source=ig_web_copy_link -
New Recall Alert : Fuel System
For those that haven't received the letter, this is what it says... -
LR4 vacuum pump replacement info
@gsxr Thanks for the part numbers. Mine is coated with oil, but luckily there's not drip per se. I'll have to do this soon, been holding off for ever as well. -
New engine
Sorry that you have to get a new engine, but if you're about to put it in I'd suggest doing a little maintenance to save you a bunch of headache down the road. #1 thing is dry compression test it right out of the donor vehicle, it'll give you a health check and indication of what needs to be... -
255/65/19 DuraTrac
After 6 sliced sidewalls, I went all-in with 17s on 255/70r17 KO2s. Close to oem size. I've done a lot tougher trails airing down to 25 up front and 30 on the rear, and I use the entire sidewall.
