Search results

  1. S

    Surprising oil usage

    Pop the intake off and look at the throttle body.
  2. S

    Disabling door sensors?

    If you leave your gap tool plugged in it'll display the voltage in the center display. Watch it next time you're out, you should be able to see when it is charging.
  3. S

    Open to Suggestions

    Quick update. Lower control arms are rebuilt. Did some rust mitigation on some welds in the engine bay. New motor mounts are in. Transmission is back in after getting seals replaced. Motor will be here at some point next week. I had some random bracket on the ground and spent a bit...
  4. S

    I think it's time to move on...

    There's got to be a kit to go from a GM bolt pattern to the ZF transmission.
  5. S

    Zip kit and fluid change, now won't go past 5th

    I was getting hard shifts between 1 and 2 near 100k miles. Changed pan and fluid and nothing changed. Reset the transmission adaptations and it was back to being super smooth. My guess is that the zip kit was unnecessary and just resetting the transmission adaptions would have improved things.
  6. S

    I think it's time to move on...

    2008s came with the Bluetooth version of that bushing mount. You're good to go.
  7. S

    I think it's time to move on...

    Tapa, Estes is showing it at what I assume is the local delivery location. Should get a call to schedule delivery today or Monday.
  8. S

    Steering column switch not working to adjust steering column

    Check your fuses? I have no idea which one.
  9. S

    My LR4 experiences in terms of mechanical issues that keep piling up

    I'm not doing the math for my situation.
  10. S

    My LR4 experiences in terms of mechanical issues that keep piling up

    Could get an LX 570 with similar mileage for twice the money, or more.
  11. S

    Updated sources for skid plating?

    Have you ever been looking for an excuse to get a plasma cutter?
  12. S

    Radiator replacement

    Second that bit about that condenser. It was one of the hardest parts of engine removal.
  13. S

    Open to Suggestions

    IDK. I couldn't discern any markings. It was noticeably stiffer than the passenger side. Lemforder replacements should be here by the end of the week.
  14. S

    Open to Suggestions

    Lower control arms are off and got a vice grip rebuild while I wait for ball joints and bushings. Driver's side boot was torn. What is this blocked off fitting on the back of the intake manifold? I know this was developed during pretty lean times at JLR, but this makes no sense to me...
  15. S

    Persistent P0430 on my 2012 5.0

    Would he need three of those? Or only one in the last position?
  16. S

    Radiator replacement

    Uro LR028136-PRM Haven't bought one myself, just saw it while browsing for parts for my rebuild.
  17. S

    Persistent P0430 on my 2012 5.0

    You can try new O2 sensors on the relevant bank. Should probably replace them with the new cat anyhow. Toss 3 new sensors in and if it goes away, win. If not swap them over to the new cat.
  18. S

    Bullet Proof Control Arm Bushings

    Going to admit that I was a little slow digesting why someone would need a bushing that can withstand a direct hit from a rifle round.
  19. S

    Radiator replacement

    Temperature sensors. Uro makes an aluminum replacement for the connector between the oil cooler and the water pump. I just got a nissens, but I don't have a motor, so I can't vouch for it. I put a nissens in my 240 Volvo wagon a couple years ago, been fine.
  20. S

    Door seam (inner driver) rust? 2016 LR4.

    Drain hole on the bad door clear? If you pry the window gasket back a bit and pour some water in does it flow out? I wouldn't have thought of this without the pictures
  21. S

    Open to Suggestions

    Going a little further down that slippery slope, ordering upper control arms. I've got access to the bolts the rest of you could only have nightmares about.
  22. S

    Open to Suggestions

    Bring the transmission to a shop in the winter beater / race car.
  23. S

    Open to Suggestions

    New long block and supercharger shipped yesterday, should be here in a week. I'll see what I want to order for new bolt ons and sensors when it gets here. I'm thinking new cam solenoids and sensors is wise. First new parts day today. New radiator and new (reman) alternator. Thought about a...
  24. S

    I think it's time to move on...

    First gen cayenne could be had with a proper transfer case and a locking or limited slip rear diff. Could be had with a diesel too. Making that choice would also require the clown putting on the make-up meme.
  25. S

    I think it's time to move on...

    I ordered a remanufactured motor yesterday. There should be a support group for people like us.

Latest posts

Staff online

Members online

Total: 580 (members: 6, guests: 574)

Forum statistics

Threads
36,702
Posts
222,587
Members
30,876
Latest member
Ejp1989

Share this page

Top