scapistron's latest activity
-
Sscapistron replied to the thread Cylinder 5 misfire rabbit hole.I'd test the coolant for combustion gas.
-
Sscapistron replied to the thread PSA - Kings Cross Automotive, SW Washington state.ZF can make a very good transmission. The old 6 speed and the 8 speed are solid units. That 9 speed that got put in all the...
-
Sscapistron replied to the thread Everything about tires for LR4/ LR3 with 18" wheels.Nomad Grappler is about as good as it gets in 255/65r18.
-
Sscapistron replied to the thread Everything about tires for LR4/ LR3 with 18" wheels.255/65r18 is about 1/2" smaller overall diameter.
-
Sscapistron replied to the thread vibration at idle - motor mounts?.I've never found the v6 to be particularly smooth around idle.
-
Sscapistron reacted to umbertob's post in the thread Everything about tires for LR4/ LR3 with 18" wheels with
Like.
Good 'ole proportions they taught us in school... a:b=c:d When we know the load at the maximum pressure of the OEM tires (2271 lbs @ 50... -
Sscapistron reacted to wallyyfm's post in the thread Everything about tires for LR4/ LR3 with 18" wheels with Like.
If this thread gets to 1000 posts I’ll give away a Land Rover to one of my lucky subscribers!
-
Sscapistron replied to the thread bad lower ball joint lead to howling?.If you have more time than money, or like a challenge. Pull the whole arm and replace the bushings and ball joint. If you just want...
-
Sscapistron replied to the thread Help.Replacing the engine is going to cost a lot more than $4000 let alone $400. If you want to try and save it you need to figure out if...
-
Sscapistron replied to the thread Rear Ladders on LR4.I use the Kilimanjaro door latch steps for up front.
-
Sscapistron replied to the thread Open to Suggestions.Ordered a remanufactured long block from tapa out in California. You can find them on eBay, guy was great to work with. So far I'm...
