umbertob
Full Access Member
I keep the original remote buried into my glove box for such a catastrophic event - a rainy day with a power blackout. 
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
It doesn’t impact the other car. The garage door opener just sees the repeater as another remote. It basically dumbs down the protocol/encryption for older cars.Thanks for the responses. Lots of good input.
For now I’ll just have the liftmaster remote on the visor. Looks like the repeater is the only option, but I don’t want to mess up the other car.
No big deal.
I had to hold my 1&3 buttons for 30 secs until I got the fast blinking that reset the Homelink in the car. Then I pressed and held the remote opener button whilst pressing and holding button 1 on the car for about 5 seconds and it programmed first time. After I programmed the remote control to the Homelink in the car, I then had to press the 'Learn' button on the door opener, then go back and press button 1 on the car within 30 seconds. This synced the car to the door opener.Done everything the manual says. The manual says to reset “hold buttons 1 & 3 for 10 secs until slow blink”
I do this, light stays solid.
manual says “don’t hold for 20 secs”
WHY? What happens after 20?
I held 1&3 for 20secs... light blinks fast.