KeninNC
Member
2015 USA LR4 with 3.0 V6 Petrol
I have an interesting issue with the flashing Amber Adaptive front lighting system.
I purchased a wrecked LR4 from a salvage auction. The airbags did not go off but it needed a replacement hood, grill, lights, bumper and front wheel arches. After fitting these all is good except the flashing amber light on the instrument cluster.
The LR4 is a HSE Luxury so I assumed it had adaptive lights.
While putting it back together I was getting error codes from my Gap IID tool
B1D64-87 (AF) Motor operation malfunction of left actuator - Bus signal/message failure - missing a message
B1D65-87 (AF) Motor operation malfunction of right actuator - Bus signal/message failure - missing a message
Due to the adaptive headlights being so expensive ($2,800 US dollars new) and ($1,500 US dollars used) my plans were to buy just xenon and then change the CCF file and turn off the Adaptive Headlights using the Gap IID tool.
I was able to find a used left headlight with adaptive for a reasonable price but not the right side, so I purchased just xenon for the right side.
I am still getting code B1D65-87 for the right side.
Here is where I need some help.
After purchasing a licence for the Gap tool for the LR4 so I could change the CCF file the settings show Adaptive Lights are not configured. I did change the setting to configured and then back to not configured hoping this may solve the issue but I am still getting the flashing amber adaptive front lighting system warning.
Any thoughts?
I have an interesting issue with the flashing Amber Adaptive front lighting system.
I purchased a wrecked LR4 from a salvage auction. The airbags did not go off but it needed a replacement hood, grill, lights, bumper and front wheel arches. After fitting these all is good except the flashing amber light on the instrument cluster.
The LR4 is a HSE Luxury so I assumed it had adaptive lights.
While putting it back together I was getting error codes from my Gap IID tool
B1D64-87 (AF) Motor operation malfunction of left actuator - Bus signal/message failure - missing a message
B1D65-87 (AF) Motor operation malfunction of right actuator - Bus signal/message failure - missing a message
Due to the adaptive headlights being so expensive ($2,800 US dollars new) and ($1,500 US dollars used) my plans were to buy just xenon and then change the CCF file and turn off the Adaptive Headlights using the Gap IID tool.
I was able to find a used left headlight with adaptive for a reasonable price but not the right side, so I purchased just xenon for the right side.
I am still getting code B1D65-87 for the right side.
Here is where I need some help.
After purchasing a licence for the Gap tool for the LR4 so I could change the CCF file the settings show Adaptive Lights are not configured. I did change the setting to configured and then back to not configured hoping this may solve the issue but I am still getting the flashing amber adaptive front lighting system warning.
Any thoughts?