Search results
-
P0526-17 (28) Fan speed sensor circuit - General electrical failure - circuit voltage above threshold
Hi Folks, I've been fighting this one for a while now but this weekend tried getting to the bottom of the issue without success; here's the gap tool screen: Here's what I've tried so far: - Installed a new viscous fan (Mahle OEM) - no change - Checked, reseated, cleaned and applied... -
Beep beep
Hey Folks - I mentioned this in the past but have a little more bandwidth at the moment to look at this issue... I notice that when pressing the button on the drivers door handle to lock the car I often get the "beep beep" noise and the car won't lock. If I move around ever so slightly in the... -
P0232-24 (28) Fuel pump A - secondary circuit high - General signal failure - signal stays high
Hi Folks, following my recent Timing Chain endeavor, I'm getting the following code which returns immediately after it's been cleared: "P0232-24 (28) Fuel pump A - secondary circuit high - General signal failure - signal stays high" But unlike others, the truck runs absolutely fine, I've not... -
V8 5.0L Intake Manifold - what is the rear sensor?
Can anyone tell me what this sensor is? I don't like the color; wondering if I should replace it while the manifold is out? This one: Thanks. -
Tensioners - (for the timing chain) - what's the deal?
Hey Folks, The more I go down the rabbit hole with this timing chain job the more I realize the small nuances make a difference in overall project success... Today, I'm trying to figure out the procedure with the timing chain tensioners. Having watched many YouTube videos and posts on the web... -
Land Rover Valve Cover Spark Plug Gasket - Genuine Rover LR014345 - thoughts on cost
Curious what folks think of the price difference between OE and after market for valve cover spark plug/injector gaskets, so OE are $25.19 (I assume this is each) and after market are $4.79. I'm having a hard time reconciling this huge cost difference and whether it's worth paying over $200 for... -
Timing Chain parts
Can somebody confirm if the passenger side chain and the driver side chain are the same; I imagine they are (given the physics) but I'd like to be sure (part LR032048). Same question for the tensioner (the hydraulic/spring tensioner) (part LR095472) and then again for the guide (the aluminum... -
Coil electrical connector removal (x8)
Hi Folks, the following is a picture of the electrical connector that connects the coil to the engine wiring harness. There are 8 of these; 1 for each coil (it's the V8): I really don't want to break any wires so I'm looking for tips on how to disconnect these; is it a case of pulling back... -
Looking to purchase timing chain tools
Hey Folks, In the spirit of recycling things and before I head off to Amazon does anyone have either kit that they'd like to sale, I'm looking for two kits similar to these: Crankshaft Pulley Remover Installer Tool Kit Petrol Timing Tools (V8) 5.0L I'd be grateful for other suggestions as... -
Serpentine/Accessory belt failure on a very wet, dark MI road in the middle of nowhere...
We had an interesting night last night, having just gotten the truck back on the road after replacing the transmission fluid! I decided to take two of the kids and a friend out for dinner; I like to explore new places and so we ventured out. During dinner we got hit by a huge thunder and... -
Transmission - Mechatronic Valve Body Sleeve (TZV500010) replacement - help!
Hi Team, per my other thread I'm in the middle of replacing the transmission fluid on the 6HP28 unit (2012 LR4 - 102K miles). I purchased a new mechatronic valve body sleeve but now I'm seriously questioning if I should replace the existing sleeve (it's not leaking (currently))? I'm really... -
Transmission taking too long to shift
This seems like a new behavior today although I've had my suspicions about the transmission for a while, I'm noticing the engine revs are a little higher than I'd like and the transmission is taking longer than I'd expect to shift to the next higher gear. For example, while in second gear the... -
Interior sill plate protection
Just wondering if anyone has found/installed an interior sill plate protector? My paint work is pretty scratched up and I'd like to (1) cover it up and (2) give it some more protection; here's a photo: Ideally the solution would have some curvature to it so that it wraps over the issue... -
Rear handbrake - learning from my mistakes!
I recently had a very weird noise coming from my rear left (US - passenger side) wheel, it was sufficiently loud that when passing pedestrians they'd look over at the LR4 (and probably helped perpetuate the perception that they're unreliable)... Anyway, lots of weird and different noises were... -
2012 LR4 Reluctant to lower from off-road suspension mode
Hi Folks, I just rebuilt the front suspension valve block (new o-rings) and now the LR4 seems to stay up over night (good news), the problem I have existed before doing this work and appears to be in the rear. Here's a summary of the issue. 1) I select off-road as the suspension mode and the... -
P0500 VSS OBD2 "A" circuit
I'm getting a P0500 code, can somebody point me to where I might find this sensor and how difficult is it to replace? Thank you. -
Doors not unlocking reliably with the exterior door handle locking button
Background Information: All four doors have an exterior handle with a lock/unlock button (see image – from the driver’s door) New batteries installed to the two different key fobs (CR2032) Driver door card removed, the exterior door handle cable was disconnected from the wiring harness (which... -
2012 Radio not storing preset stations or returning to last station listened to
In my 2012 LR4 you can press and hold the preset radio buttons to store the station that you're currently listening to and this works fine. As soon as you turn off the car these preset stations return to 88.3. In addition; when you start the car the last station that you were listening to (say...
