Search results
-
Wheel Hub Assembly Replacement
They tend to rust out and begin to creak and crack over time. The bearing assembly inside of mine had failed causing the grinding noise. Metal on metal contact. -
-
-
Front bumper/Fender grommets
Can anyone lead me to where I can purchase bumper grommets? I was involved in a minor fender bender last night. Long story short a young Domino's delivery driver brake checked me after I flashed my lights at him over not using a blinker. Insurance is putting him at fault for negligence. Thanks... -
Wheel Hub Assembly Replacement
Not sure if this has been written out somewhere, but my new wheel hub assembly finally arrived around noon today. Decided to knock it out this afternoon. It took about 1.5 hours. I followed Atlantic British' YouTube directional video for advice. Signs of a bad bearings/hub vary, but I... -
LR4 Favorite Year?
Look for "HSE Lux" as this package most likely has the HD package. I was unaware of this prior to purchasing my 2010 and lucked out. The 5.0 is a solid platform. Much better than the previous LR3's v8 in terms of management and reliability. Water pump is really the only thing to look out for as... -
Are these OEM or > Quality Brakes?
I didn't realize Porterfield made pads for Land Rover. Had a set on my GL550 a few years back and loved them. Thanks! -
Prospeed roof ladder and light bar
There's a YouTube video posted by "pawkrw" of his LR4 with the light bar setup and grill light setup. I plan on ordering the grill brackets eventually and adding lights there. I like the light bar, but you have to drill into the A Pillar, heads up. -
5v connection in lift gate
I actually installed a rear cam. I'll take pics and post later tonight of wiring I spliced. Very easy install. -
Stock Wheels: Keep or Sell?
I'd sell. I'm actually trying to sell my 20" Stormer wheels to pick up a set of 18" Compo's. I need more sidewall. -
The obligatory "Show off your LR3' thread
How?! @grimmecm Ive seen Lucky8 stuff 33x12.5 grapplers under their Disco3, but never 34's. How much did you havd to hack away? What wheels are those? -
2011 - 2017 LR4 - My Experiences
I've owned my 2010 for about three months now. I have an extended warranty, five years/158k miles(currently has 93.5k). Thus far I've only had to replace: - Hood latch assembly due to the alarm going off at night - Compressor. Upgraded to AMK with software reflash. - Cleaned MAF sensors after... -
Front Runner Ladder Installed
I've got a Voyanger low profile rack on the way as well as ProSpeed front and rear lower control arm guards. Got them shipped international for $75. Dreading the import tax if there is one.- ncburch22
- Post #3
- Forum: Member's Photos
-
30A Trails in Florida
I'm from the Orlando area. I'll have to check this out next time I'm up that way! -
LR4 Immobilized
They were lying to you to get to your pocketbook. I stay clear of any LR dealers. Even with my extended warranty. They wanted $1099 for brakes. I sourced the parts for $438 back and front OEM. I take mine to E2 Services in Orlando and Duffy's Garage in Birmingham. Both reputable indy shops -
JL Audio Sub and Amp $420
I am regretfully selling my JL Audio Stealthbox and 300watt mono amp. Ive decided to install Front Runner's rear cargo setup with the sliding trey and the audio setup will not fit with this installed. The sealed enclosure pokes out about 1 1/4". I purchased the amp for $300 on Amazon and the... -
Are these OEM or > Quality Brakes?
Thank for the link! I'm heading to Home Depot now to pick up a cordless impact wrench. Should make thinks a lot easier. I found the torque specs for all the bolts and lugs on workshop manual. Looks fairly easy and straight forward -
roof rack
Look into Voyanger racks as well. As for ProSpeed, are you guys ordering from their U.K. site? How is international shipping? I like their control arm guards. $214 shipped international for front/rear isn't too bad IMO. The Asfir4x4 guards ship from AZ and cost $180 for shipping to the south. A... -
Are these OEM or > Quality Brakes?
@churious good point. I've yet to order a new set of brakes due to comparing brands, but I saw that Textar and Centric were both OEM. Nothing against Hawk or EBC Greenstuff. Do you use regular rotors as well or a high carbon type? -
Are these OEM or > Quality Brakes?
ill go with EBC greenstuff and regular rotors. Had drilled and slotted on my Suburban. Worked great, but I think with good pads I'll be fine without -
Are these OEM or > Quality Brakes?
Shopping around for brakes. Anyone use ACDelco 18A2538? They're compatible as are the TRW TPC1479 pads so I know they'll install properly. Just didn't know if anyone had feedback? The only two Amazon reviews are good. $211 for pads and rotors. Sensor hasn't tripped yet so I'll re-use it. -
LR4 Clicking Noise from Engine
Glad I purchased a 3rd party extended warranty on mine. So far so good with 93k miles. At least now I'll know where to look if something arises. -
Oil Capacity w/ BG MOA
I know a lot of you use BG products. When changing oil do you subtract the 11oz of MOA from the 8qts required for oil change or pour all 8qtz oil + additive? -
Source for TPMS sensors...Black Compos on a 2016 LR4
This thread escalated quickly
