Search results
-
Multiple Errors - Parking Brake, Suspension, Fun!
Perhaps have the battery checked? Mine was 6 years so you're in the zone. By "hold down clamp" do you mean the bracket and two threaded shafts that keep the battery in place? Not critical but I wouldn't be happy without this, I wouldn't want it bouncing around in my engine bay... Just my... -
P0526-17 (28) Fan speed sensor circuit - General electrical failure - circuit voltage above threshold
Great to know Jimmy - my battery is new a few months ago so keep that in mind. I checked my scanner again today and I'm still code free (not counting my chickens though!). I was getting this code (like you a fuel pump issue): Which went away with the aforementioned battery change... Keep... -
2012 LR4 Reluctant to lower from off-road suspension mode
As I mentioned in the other post, mine runs shortly after cold start and then as needed. The car will level itself every two hours when not running (which is why there are threads when diagnosing overnight dropping issues that talk about removing the fuse in the engine bay). Other than this... -
2010 LR4 Air suspension need advice
My compressor always runs shortly after starting the car when cold. Look at this thread for details on pressure behavior (I believe you have a question in there as well - so I'll look shortly)... -
Multiple Errors - Parking Brake, Suspension, Fun!
Take a look at this thread for the venting issue, I went down the rabbit hole with that one! https://www.landroverworld.org/threads/2012-lr4-reluctant-to-lower-from-off-road-suspension-mode.44636/ These things are really sensitive to batteries; most batteries have a manufactured date on them... -
Prepping for SCV6 120k mi service
Not sure to be honest, I didn't do mine and have not heard of others doing this while on my "virtual travels"! -
Prepping for SCV6 120k mi service
Looks like you're headed in the right direction, I like the idea of the metal parts but bear in mind that metal also fatigues. OE components are designed and engineered very carefully and undergo extensive validation testing before ever being released; can the same be said for these aftermarket... -
P0526-17 (28) Fan speed sensor circuit - General electrical failure - circuit voltage above threshold
I love Elves! The fact that the Autel cleared the fault and the GAP scanner couldn't find the fault was pretty cool (@Rover Range - do you consider the GAP tool as a generic tool? I realize you get the real tools but us DIYers have to make do with what we can find)! I do have questions about... -
Should I Rebuild?
The key aspect here is: "I was ready to put one into my rig when I bought it in 2023, but it didn't need it." How did you determine this and could OP use a similar approach to come to the same conclusion? -
Prepping for SCV6 120k mi service
Ohh - And I have the V8 so perhaps you need to just use the part names but not the part numbers - sorry about that! -
Prepping for SCV6 120k mi service
I did my cooling system when I did my chains, here's my parts list for this (for your consideration and perusal): Timing chain parts, obviously you don't need many of these but again here are more parts for you to consider: My serpentine belt failed which led to this: Hope this helps a... -
P0526-17 (28) Fan speed sensor circuit - General electrical failure - circuit voltage above threshold
Update (both good and bad! but mostly good). I used the Autel MaxiAP AP200 and got the same code (P0526 but without the additional numbers); so I used it to clear the code, scanning again the code is gone and didn't come back, I then checked it with the GAP tool and see the same! Weird! I did... -
P0526-17 (28) Fan speed sensor circuit - General electrical failure - circuit voltage above threshold
Thank you. It is spinning freely, I did see others mention motor mounts but every time I've looked at the fan it's turning at the same speed as the pulley on which it mounts so I discounted this (I will off-course double check). It's weird that it doesn't show up in the LR manual, I swear... -
P0526-17 (28) Fan speed sensor circuit - General electrical failure - circuit voltage above threshold
Hi Folks, I've been fighting this one for a while now but this weekend tried getting to the bottom of the issue without success; here's the gap tool screen: Here's what I've tried so far: - Installed a new viscous fan (Mahle OEM) - no change - Checked, reseated, cleaned and applied... -
2010 LR4 Air suspension need advice
Yeah - that as well, I didn't find that terrible to be honest, just take your time! -
2010 LR4 Air suspension need advice
I didn't find the top mounting bolt that difficult on the compressor, in fact it pales in comparison to some of the other "bolt" experiences on this vehicle (thinking the rear suspension valve block air hose nut and valve cover rear bolts on the drivers side, + others!). Don't let this stop you... -
Replace the VVT Phasers when replacing chains on a '16 LR4
I opted not to do mine purely from a financial perspective; time will tell if it's an OK decision... I know with bike chains it's encouraged to swap out the cassette and front rings. I don't know how the stretching of the chain impacts the wear on the VVT's but I have to imagine that we're... -
2011 LR4 Suspension code U3000-1D
Awesome - well done and thanks for reporting back :) -
2011 LR4 Suspension code U3000-1D
Like many codes I fear! This is why I always try and leave a trail for others to follow... The ball is yours for this one! Please keep us posted. -
Beep beep
Page 4210 of the Manual has this: CJB = central junction box It sure seems there are a lot of Antennas! I'm thinking that the wiring diagram should have something in terms of the wiring but I'm not sure if this will help with the location of the antennas? Yesterday I had the key in my... -
2011 LR4 Suspension code U3000-1D
A quick search also yielded some other posts, does look like the U3000 is suspension related. https://www.disco3.co.uk/forum/post2378943.html https://www.landyzone.co.uk/land-rover/rr-sport-2010-air-compressor.378006/#post-5333187 https://www.rangerovers.net/threads/suspension-fault.352250/ -
2011 LR4 Suspension code U3000-1D
This U3000-1D doesn't mention suspension at all, could it be unrelated to your changes (other than the timing of the suspension raise request)? Is your battery OK? Bear in mind these things are super sensitive to dying batteries. I assume all the electrical connectors are OK? -
Beep beep
The phone blocking makes sense but the driver sides doesn't. I need to look at where the sensor is located in the vehicle and see if that's somehow impacting the behavior. Not sure yet what parts to be looking at... I thinking opening behavior is OK though, what's with that!
