Search results
-
Control arms debacle
Believe it or not. I've see it before. The arms were swapped and upside down. The arms should slip right into the frame mounts when installing.- Rover Range
- Post #4
- Forum: LR4
-
-
Anyone swapped out for newer seats?
At a quick glance, the seat frame mounts look the same.- Rover Range
- Post #3
- Forum: LR4
-
LUX vs Vision package
Send me your VIN # and I get you the official Land Rover build list.- Rover Range
- Post #8
- Forum: LR4
-
Tensioners - (for the timing chain) - what's the deal?
2013 on up models have the revised chain guides.- Rover Range
- Post #17
- Forum: LR4
-
Fuel pressure regulation
The timing marks on the fuel pump drive sprocket has to line up with the colored link on the chain. Did you use the timing tool at the vacuum pump?- Rover Range
- Post #6
- Forum: Range Rover
-
Milling....
Any decent machine shop will know the maximum that they can machine off the head gasket surfaces without causing issues. Land Rover doesn't recommend machining the block and heads, that you would need thicker head gaskets. The cylinder liners are Nikasil. If that liner is machined, the Nikasil...- Rover Range
- Post #5
- Forum: LR4
-
Milling....
The cylinder liners can't be bored. Unless the liners are re Nikasiled. 1) Land Rover says maximum allowed warpage is 0.008in. They don't offer thicker head gaskets. 2) Yes.- Rover Range
- Post #2
- Forum: LR4
-
P0016 comes and goes after oil change
Could be an issue with the VVT sprockets.- Rover Range
- Post #4
- Forum: LR4
-
P0016 comes and goes after oil change
That DTC indicates that the cam timing is off.- Rover Range
- Post #2
- Forum: LR4
-
Fuel pressure regulation
It involves locking the flywheel , removing the vacuum pump and installing an alignment tool into the vacuum pump drive.- Rover Range
- Post #4
- Forum: Range Rover
-
Fuel pressure regulation
Sounds like the high pressure fuel pumps are out of time. Chain for the balance shaft may have jumped time. Balance shaft operates the pumps.- Rover Range
- Post #2
- Forum: Range Rover
-
Difficulties finding steering shaft parts! If you have access to OEM catalogs, help!
LR071147 Is the correct part from Land Rover.- Rover Range
- Post #2
- Forum: LR4
-
-
Rear door vent glass vs window glass replacement
Neither one. You can remove the rear license plate light assembly. Use a screwdriver to gently pry the sheet metal apart. Use some needle nose pliers to pull on the rear hatch safety release strap.- Rover Range
- Post #2
- Forum: Range Rover
-
New Range Rover Owners 2021 Westminster Edition
They can be reliable. You just have to pay attention to when the vehicle "talks " to you. Via, smells, warning messages ,and noises.- Rover Range
- Post #4
- Forum: Member's Photos
-
New Range Rover Owners 2021 Westminster Edition
Keep up with the maintenance and get an extended warranty. Preferably, the one JLR offers.- Rover Range
- Post #2
- Forum: Member's Photos
-
No Start after replacing coolant temp sensor
Holding the throttle wide open while cranking shuts off the fuel injectors. Also know as "clear flood mode."- Rover Range
- Post #4
- Forum: LR3
-
Two inner CV’s died- what could it be?
Could be the front prop shaft. Try grabbing the shaft and move it up and down at the joints. Should be no movement.- Rover Range
- Post #2
- Forum: LR4
-
No Start after replacing coolant temp sensor
A no start could be caused by excessive throttle body cleaner in the intake. You can hold the throttle wide open, while cranking and see if that clears it out.- Rover Range
- Post #2
- Forum: LR3
-
Supercharger Question
There are many differences. eg: compression ratios, variable cam timing, piston oil cooling jets, oil pump controls.....- Rover Range
- Post #2
- Forum: LR4
-
2012 LR4 - Diagnosing two separate vibrations
Every rotating component in a vehicle that is out of balance, generates a frequency. When I was a Ford tech, we used this to identify where the vibration came from...- Rover Range
- Post #10
- Forum: LR4
-
Dashboard Light (i)
It means, look for another warning light/message. Scroll through the instrument cluster warning messages.- Rover Range
- Post #2
- Forum: Discovery 5
-
-
