Death wobble after coil springs installed

[96RR]

I have a 96 RR and just converted to the coil springs. Now i have a very very bad death wobble. Starts at any speed and have to come almost to a complete stop to get to go away. Ive read swivel pins can cause but not sure that the 96 RR has them. Any suggestions? Before the coil springs were put on i had a slight shimmy around 50-55 but not bad and would only go for 1-2 seconds

 

[96RR]

Checked and found my sway bar link on the right side is broken also both shocks are shot. Got the parts will put them on tomorrow. I hope thats it. I have my doubts, but that is the only things I can find wrong. Oh I also set my toe from +1/16 to 0

 

[Alex1818]

yeah i have a 2000 RR that i converted to coils and i would expierence the wobbles every now and then and found out that it was my sway bar also