Search results
-
Range rover sport control arms on LR4
Hey all, Did some research on forums and saw a post regarding the 08 range rover sport LCA fitting and working better on the LR4 than the LR4 oem LCA. Can anyone else on this forum verified if they’ve ever gone this route? Do they actually fit and are there any benefits over the OEM lr4 arms... -
Pending codes on a 110k mile 2011 LR4
Hey everyone, I’ve been battling a few pending codes for the past couple weeks. The engine light has never been triggered, but i sensed an issue when i noticed the truck stumbling a bit when it was idling at a stoplight. That made me check for codes with the scanner. It does NOT currently... -
1 year old OEM denso LR4 5.0 V8 Alternator
Anyone interested in buying a one year old OEM alternator? It was installed on my truck about a year ago and has about 6k miles on it. Reason i’m getting rid of it is because i’m installing a high output alternator. I’m about to install a a 5k watt sound system and I’m pretty sure this stock 150... -
Driver door not locking
Hey guys i’m pretty sure its my door actuator that went out, but i just wanted to know if anyone else experienced this weird symptom along with it. Upon locking the door with the keyfob, all of the doors lock, but the drivers door. The alarm then makes a beep beep sound approximately 5 seconds... -
Rear lower hatch sound deadening?
Hey all, has anyone sealed up their rear lower hatch with any type of sound deadening material? I'm getting too much exhaust sound from my muffler delete. I'm just trying to decrease the sound a bit for the rear seat passengers haha. I've thought about Dynamat, those square foam sheets on... -
Higher output alternator?
Has anyone come across a better alternator than the stock Denso 150amp OEM one? I've seen 250amp ones at 1.5k rpm for the LR3, but nothing solid for the LR4. There is one company that makes a 240 and 320amp alternator for the LR4. I'm really skeptical of them and think that their alternators... -
Interior Panel Part # please!
Hey everyone. I scuffed this panel on the passenger side many years ago. I tried covering it up with a paint marker few weeks ago. Now it looks like crap. Does anyone know what the part number is? I’ve looked at countless parts diagrams on those dealer part sites. Maybe i’m missing it. Please help! -
Spark Plug Gapping
Hey everyone, Has anyone tried gapping their plugs to .50? I know factory is 0.40 for our engines. I know that a smaller gap tends to yield plugs that last longer at the cost of power and a larger gap gives more power at the cost of plug life. I don't really care about the plugs lasting... -
Check All Tire Pressure Fault
Hey everyone, I know this topic has been covered extensively throughout this forum over the years however i believe i have a slightly different issue from the majority. I’ve been getting the “check all tire pressure” fault for a week straight. It is not the low pressure message indicating which... -
For those who have other things to worry about other than crossover pipe failure/catastrophic overheating
I had a catastrophic coolant loss with my front crossover pipe failing at 98k miles. The water pump was busted as well as coolant was coming through the weep holes. I knew about the issue for the crossovers since around 50k, but never got to replacement beforehand. Anyways back to the failure... -
19 inch rims OEM Set of 4 rims
These rims were powder coated back in 2018. The shop did a horrible job. The paint did not cure and the powercoat has been chipping. The actual rims have 0% damage. No chips or bends and is 100% round and not bent out of shape. Cosmetically is where they lack. Its perfect for someone wanting to... -
P061A & P061B64
2011 with 98k miles. Truck does not have engine light on, but when scanning for codes I have two that are coming up. I've had these codes for a few months. Initially they cleared, but now it doesn't clear when I try. The two codes are: P061A Internal Control Module Torque Performance P061B64... -
2011 V8 Exhaust
Here’s a cold start of my rover. I removed the muffler, mid resonator, and two back resonators by the tips. I added two Magnaflow Magnapacks and straight piped the rest of it to two aftermarket tips. It sounds ferociously loud upon a cold start up and when you’re gunning it on the... -
Shock alarm ideas/installation?
Hey all, has anyone ever installed a shock alarm system on their rover? I know the factory alarm doesn’t do anything if anyone taps either bumpers or break a window. There’s been a lot of overnight break-ins in my once peaceful neighborhood. Please do chime in on what you guys have and any tips... -
Ram, raptor, silverado, or LR4?
https://www.autoevolution.com/news/lr4-land-rover-discovery-pickup-truck-conversion-looks-as-if-land-rover-made-it-156077.html -
Rear hatch still stuck!!
Hey all, I replaced the exterior rear door hatch switch. The upper hatch still would not open. No noise or anything when I press the button. Then I crawled in the back and undid the carpet and pulled on the cable and got the trunk open. Then i changed the actuator and the locking mechanism... -
Engine takes forever to warm up
Is it normal for an LR4 V8 engine to take 30 mins to move only a quarter from cold on the dash during idle? Upon driving it warms right up into the middle within 2-4 mins. I don't normally warm the lr4 up, i just start it and let it idle down and drive it softly until it warms up which is within... -
Multiple Fault Codes From RSW solutions 4DSCAN Tool
Hey all, My LR4 has 95000 miles and it doesn't have the check engine light on, however upon connecting my scan tool from RSW, it pulled a few codes from the engine. Does anyone have some insight on these codes? I did a general search on google and it appears it could be anything from an exhaust... -
Line Output Converter/Aftermarket Amp
I want to upgrade the door speakers on my rig. It’s a 2011 with the base harmon kardon system. Can someone recommend some speakers they’ve used? Also i’d like to add a line output converter from the stock amp to an aftermarket amp to power those speakers. How would you go about installing this... -
Firestone Air Strut Leak
I had my passenger front air strut replaced at the dealer about 6 years ago. I always thought it was an OEM air strut until i diagnosed it the other day and found out that it’s a firestone air strut? Since when does firestone make air struts for our trucks? I did some research online and they... -
0W-30 Oil for 2011 V8?
Hey everyone, I have a 2011MY with 93k miles that’s running pretty well. I do a lot of vigorous driving and almost always carry a full truck with 7 adults. I do some light towing as well. I live in NYC where temps go as low as 15 degrees and as high as 95-100 in the summer months. I’ve been... -
Intake Valve Cleaning
Hey everyone, i have a few questions i’d like to ask you all in regards to the valves on our DI engines. I’m not experiencing any issues with the motor, but i know they’re prone to carbon build up on top of the valves. I just want to do some preventative maintenance as the truck has 89k miles... -
What is the part??
I removed my side vents on my rover and noticed a rubber/plastic bag filled with some type of material in it. Theres also some moisture in there. It’s under the side vent inside the front side panel. Does anyone know what it is? -
CEL after alternator/tranny fluid swap
Hey all, anyone have any idea what these codes are in regard to? i tried clearing them with my RSW tool but they won't clear. I disconnected the battery instead and they're gone for now. Ill drive it around tomorrow and report back. Do you guys think it has to do with the recent alternator swap... -
Caked on Brake dust removal tips?
I had my rims powder coated about 3 years ago. I usually clean my rims roughly every 2-3 weeks. However, i got a bit lazy and didn’t tackle them in about 2 months or roughly 3k miles. Now upon cleaning, the corners/creases on the rims have caked on brake dust. Only 85% of the brake dust came off...
