My check engine light came on and the code that came up was P0441: "Evaporative Emission System Incorrect Purge Flow". I've read that for other, older Land Rover models this means replace the purge valve. Does anyone know if this also pertains to newer Range Rovers, i.e. 2006?
2006 Supercharged - Emission Code
- Thread starter b3nemeth
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Disco Mike
Full Access Member
- Joined
- Jun 20, 2009
- Posts
- 1,949
- Reaction score
- 4
No, only 443, 444 and 445 refer to the purge valve, I would start looking for a cracked vacuum hose.
LandRvrTech
Member
- Joined
- Dec 5, 2010
- Posts
- 17
- Reaction score
- 0
What is the last 8 of your VIN number? There is a bulletin out for certain '06 Range Rovers with this code for updated PCM software calibrations....
Po441 error code
Ive have the same code for 2006 supercharged full size range rover, & when I research the code its says its for the purge valve
Ive have the same code for 2006 supercharged full size range rover, & when I research the code its says its for the purge valve
P0441 is a purge flow fault.
It is usually the valve itself, but there are other possible causes, such as a restriction in the vapor line, or in the inlet filter or vent valve.
Step one with the is going to be replace the valve, it's not cheap, but it's pretty easy to replace.
It is usually the valve itself, but there are other possible causes, such as a restriction in the vapor line, or in the inlet filter or vent valve.
Step one with the is going to be replace the valve, it's not cheap, but it's pretty easy to replace.
redline8725
New Member
same code on my 2011 RR HSE sport, anyone else have the same problem on this year ?
